News
Ultramax Hydrojet — India's most trusted CE Certified industrial cleaning machine manufacturer since 2000 For inquiries call +91 90805 31215  |  500+ installations across India Ultramax Hydrojet — India's most trusted CE Certified industrial cleaning machine manufacturer since 2000 For inquiries call +91 90805 31215  |  500+ installations across India

Spray Cum Ultrasonic Washing Machine

Component Cleaning Machine

Twin Clean

Spray Cum Ultrasonic Front-Loading Batch Washer

The Twin Clean Spray Cum Ultrasonic Washing Machine is a heavy-duty, front-loading batch cleaning system designed for high-precision component surface cleaning and internal decontamination. This hybrid system integrates high-pressure spray washing, injection flood washing, dual-frequency ultrasonic cavitation, post-wash rinsing, compressed air blow-off, and hot air convection drying — combining robust physical spray action with deep ultrasonic agitation to strip tenacious oils, fine chips, and particulate matter from complex mechanical components up to 1000 mm in diameter.

Key Process Specifications
Loading Configuration Front Loading
Cleaning Processes Spray Washing · Injection Flood Washing · Ultrasonic Washing · Post Washing · Rinsing
Drying Processes Hot Air Drying · Compressed Air Blowing
Media Alkaline Mixed Aqueous Solution
Control System PLC Based System
Throughput Type Batch Process
Wetted Parts All SS304 Stainless Steel
View Brochure

Features

Hybrid 5-Stage ProcessCombines high-impact spray washing (4–5 Bar), injection flood agitation, ultrasonic cavitation, pressurised post-rinsing (2–3 Bar), and convective hot air drying (120°C) in a single automated batch cycle.
Dual-Frequency Ultrasonic CavitationConfigurable 28 kHz or 40 kHz ultrasonic transducers (1500 W – 3000 W) penetrate blind holes, internal passages, and intricate geometries where spray alone cannot reach.
Lance Oscillation MechanismDynamic oscillating spray lances provide continuous, multi-angle spray coverage across all component surfaces — eliminating blind spots and ensuring uniform impingement on large-diameter parts.
Large-Diameter Component Capability Accommodates round components up to 1000 mm diameter × 500 mm height — ideal for large gear housings, transmission components, and heavy engineering parts.
High-Capacity Multi-Tank SystemsMulti-stage tank arrangements (500/500+200 L and 750/750+200 L) isolate process fluids to prevent cross-contamination between wash and rinse stages, prolonging chemistry life.
Front-Loading Batch AccessWide front-door access simplifies loading and unloading of large, heavy components with manual or automatic trolley arrangements for ergonomic operation.
Heavy-Duty SS304 ConstructionAll internal tanks, manifolds, wetted structural frames, and processing chambers built from SS304 stainless steel for corrosion resistance under hot alkaline operation.
Advanced PLC & HMI IntegrationStandardised on Mitsubishi controls (optional Siemens, Omron, or Delta) for exact step timing, thermal regulation, cycle tracking, and process repeatability across production shifts.

Machine Models Specification

Model Max Component Dimensions Tank Capacity
UMX-TCL-600 Ø 600 mm × H 400 mm 500 / 500 + 200 Litres — SS304
UMX-TCL-800 Ø 800 mm × H 500 mm 500 / 500 + 200 Litres — SS304
UMX-TCL-1000 Ø 1000 mm × H 500 mm 750 / 750 + 200 Litres — SS304

Working Technical Specifications

Power & Process
Machine Power Load 30 – 80 kW
Washing Pressure Range 4 – 5 Bar
Rinsing Pressure Range 2 – 3 Bar
Heating Method Electrical Immersion Heaters
Initial Heating Time 45 min – 1 Hr (location dependent)
Max Media Temperature 75 °C
Max Hot Air Temperature 120 °C
Ultrasonic & Filtration
Ultrasonic Configurations
  • 28 kHz @ 1500 Watts
  • 28 kHz @ 3000 Watts
  • 40 kHz @ 1500 Watts
  • 40 kHz @ 3000 Watts
Filtration Stages
  • 1000 Micron Suction Filter
  • 500 Micron Gravity Filter
  • 25 / 50 / 100 Micron Pressurised Online Filter
Control Platform PLC & HMI
Standard Make Mitsubishi
Optional Makes Siemens, Omron, Delta

Optional Accessories

Oil Separator
4 – 5 L/hr online oil separator — continuously removes tramp oils from the wash bath during active processing, extending solution life significantly.
Oil Skimmer
1 – 2 L/hr sideline belt skimmer — a supplementary low-flow option for lighter oil contamination loads without interrupting the wash cycle.
Custom Fixture
Purpose-built component holding fixtures fabricated to your part geometry for optimised spray impingement, ultrasonic exposure, and repeatable batch positioning.
Duplex Filtration
Dual-filter switchover system — enables zero-downtime filter maintenance without interrupting active production batch cycles.
Auto Water Filling
Automatic tank level control and water filling with zero human intervention — maintains consistent bath levels and solution concentration throughout the production shift.
Auto Water Draining
Automated drain system for scheduled or on-demand tank emptying with zero human intervention for safe, efficient bath changes.
Safety Light Curtain
Type 3 safety light curtain — full operator protection at the front loading door during basket and component handling operations.
Lance Oscillation
Oscillating lance arrangement for continuously improved spray surface coverage — eliminates stationary blind spots and delivers more uniform impingement on complex geometries.

Twin Clean Spray Cum Ultrasonic Washing Machine

The Twin Clean Spray Cum Ultrasonic Washing Machine is a heavy-duty, front-loading batch cleaning system designed for high-precision component surface cleaning and internal decontamination. Engineered for demanding industrial manufacturing environments, this hybrid system integrates high-pressure spray washing, injection flood washing, dual-frequency ultrasonic cavitation, post-wash rinsing, compressed air blow-off, and hot air convection drying.

Constructed with all wetted parts in high-grade SS304 stainless steel, the Twin Clean series combines robust physical spray action with deep ultrasonic agitation to strip tenacious oils, fine chips, and particulate matter from complex mechanical components up to 1000 mm in diameter.

  • Hybrid 5-Stage Process Combines high-impact spray washing (4–5 Bar), injection flood agitation, ultrasonic cavitation, pressurised post-rinsing (2–3 Bar), and convective hot air drying (120°C) for thorough component cleaning.
  • Dual-Frequency Ultrasonic Cavitation Configurable 28 kHz or 40 kHz transducers (1500 W to 3000 W) penetrate blind holes, internal passages, and intricate geometries for sub-micron particulate removal.
  • Lance Oscillation Mechanism Dynamic oscillating spray lances provide continuous, multi-angle spray coverage across all component surfaces to eliminate blind spots and ensure uniform impingement.
  • High-Capacity Multi-Tank Systems Multi-stage tank arrangements (500/500+200 L and 750/750+200 L) isolate process fluids to prevent cross-contamination and prolong chemistry life.
  • Heavy-Duty SS304 Construction All internal tanks, manifolds, wetted structural frames, and processing chambers built from SS304 stainless steel for long-term corrosion resistance under hot alkaline operation.
  • Advanced PLC & HMI Integration Standardised on Mitsubishi controls (optional Siemens, Omron, or Delta) for exact step timing, thermal regulation, cycle tracking, and process repeatability across production shifts.
Get a Quote