News
Ultramax Hydrojet — India's most trusted CE Certified industrial cleaning machine manufacturer since 2000 For inquiries call +91 90805 31215  |  500+ installations across India Ultramax Hydrojet — India's most trusted CE Certified industrial cleaning machine manufacturer since 2000 For inquiries call +91 90805 31215  |  500+ installations across India

Cabinet Washing Machine

Component Cleaning Machine

Pure Clean

Front-Loading Cabinet Precision Component Washer

The Pure Clean Front-Loading Cabinet Washer is an advanced batch-type industrial component cleaning system engineered for complex precision washing. Integrating high-impact spray washing, injection flood washing, dual-frequency ultrasonic cavitation, post-wash rinsing, hot air convection drying, and deep vacuum drying within an enclosed front-loading cabinet — it effectively removes fine particulates, swarf, and oils from internal passages, blind holes, and complex part geometries to meet the most stringent millipore cleanliness standards.

Key Process Specifications
Loading ConfigurationFront Loading
Cleaning Processes Spray Washing · Injection Flood Washing · Ultrasonic Washing · Post Washing · Rinsing
Drying Processes Hot Air Drying · Vacuum Drying · Compressed Air Blowing
MediaAlkaline Mixed Aqueous Solution
Control SystemPLC Based System
Throughput TypeBatch Process
Wetted PartsAll SS304 Stainless Steel
View Brochure

Features

6-Stage Hybrid Cleaning Technology Combines high-pressure spray washing (4–5 Bar), injection flood agitation, ultrasonic cavitation, pressurised rinsing (2–3 Bar), hot air drying (120°C), and vacuum drying in a single automated batch cycle.
Dual-Frequency Ultrasonic Cavitation Configurable 28 kHz or 40 kHz ultrasonic transducers (1500 W – 3000 W) strip microscopic contaminants from internal cavities, micro-bores, and delicate precision surfaces.
Deep Vacuum Drying Eliminates moisture from deep blind holes, micro-bores, and complex internal channels by lowering the water boiling point — preventing corrosion and water spots on critical surfaces.
Modular Multi-Tank Design Standard multi-tank configuration expandable with a 3rd tank (500 L) and 4th tank (500 L) for multi-stage rinse, passivating, or rust-inhibition processes without major reconfiguration.
Rotational Lance Spraying Optional internal rotational lances ensure direct 360° spray impact on complex internal part geometries, recessed surfaces, and cross-drilled passages for uniform cleaning coverage.
Enclosed Front-Loading Cabinet Sealed cabinet design contains wash media, heat, and vapour inside the process chamber — creating a safe, clean, and operator-friendly working environment.
Full SS304 Construction All tanks, spray manifolds, cabinet walls, and wetted internal components fabricated from corrosion-resistant SS304 stainless steel for long life under aggressive alkaline environments.
Advanced PLC & HMI Control Standardised on Mitsubishi controls (optional Siemens, Omron, or Delta) for process automation, thermal monitoring, vacuum profiling, and full cycle diagnostics.

Machine Models Specification

Model Max Basket Dimensions (L × W × H) Tank Capacity
UMX-PRC-400 400 × 300 × 200 mm 400 + 250 Litres — SS304
UMX-PRC-600 600 × 400 × 300 mm 600 + 400 Litres — SS304
UMX-PRC-800 800 × 450 × 450 mm 600 + 400 Litres — SS304

Optional 3rd Tank (500 Litres) and 4th Tank (500 Litres) process stages are integratable on all models for multi-stage rinse, passivating, or rust-inhibition applications.

Working Technical Specifications

Power & Process
Machine Power Load40 – 80 kW
Washing Pressure Range4 – 5 Bar
Rinsing Pressure Range2 – 3 Bar
Heating MethodElectrical Immersion Heaters
Initial Heating Time45 min – 1 Hr (location dependent)
Max Media Temperature75 °C
Max Hot Air Temperature120 °C
Ultrasonic & Filtration
Ultrasonic Configurations
  • 28 kHz @ 1500 Watts
  • 28 kHz @ 3000 Watts
  • 40 kHz @ 1500 Watts
  • 40 kHz @ 3000 Watts
Filtration Stages
  • 1000 Micron Suction Filter
  • 500 Micron Gravity Filter
  • 25 / 50 / 100 Micron Pressurised Online Filter
Control PlatformPLC & HMI
Standard MakeMitsubishi
Optional MakesSiemens, Omron, Delta

Optional Accessories

Oil Separator
4 – 5 L/hr online oil separator — continuously removes tramp oils from the wash bath during active processing, extending solution life significantly.
Oil Skimmer
1 – 2 L/hr sideline belt skimmer — a supplementary low-flow option for lighter oil contamination loads without interrupting the wash cycle.
Custom Fixture
Purpose-built component holding fixtures fabricated to your part geometry for optimised spray coverage, ultrasonic immersion, and consistent batch-to-batch results.
Duplex Filtration
Dual-filter switchover system — enables zero-downtime filter maintenance without interrupting production batch cycles.
Auto Water Filling
Automatic tank level control and water filling with zero human intervention — maintains consistent bath levels and solution concentration throughout the production shift.
Auto Water Draining
Automated drain system for scheduled or on-demand tank emptying with zero human intervention for safe, efficient, unattended bath changes.
Safety Light Curtain
Type 3 safety light curtain — full operator protection at the front loading door during automatic basket loading and unloading operations.
Auto Loading Arrangement
Fully automated basket loading and unloading system — eliminates manual handling at the front door and maximises throughput on high-volume batch lines.
Rotational Lance
Internal rotational lance arrangement for improved 360° spray impact on complex internal part geometries, recessed pockets, and cross-drilled passages.

Pure Clean Cabinet Washing Machine

The Pure Clean Front-Loading Cabinet Washer is an advanced batch-type industrial component cleaning system engineered for complex precision washing. Designed for critical manufacturing applications requiring stringent millipore cleanliness, this machine integrates high-impact spray washing, injection flood washing, dual-frequency ultrasonic cavitation, post-wash rinsing, hot air convection drying, and deep vacuum drying within an enclosed front-loading cabinet.

Constructed entirely with SS304 stainless steel wetted components and capable of expanding with 3rd and 4th process tanks, the Pure Clean series effectively removes fine particulates, swarf, and oils from internal passages, blind holes, and complex part geometries.

  • 6-Stage Hybrid Cleaning TechnologySpray washing (4–5 Bar), injection flood agitation, ultrasonic cavitation, pressurised rinsing (2–3 Bar), hot air drying (120°C), and vacuum drying — all in a single automated batch cycle.
  • Dual-Frequency Ultrasonic CavitationConfigurable 28 kHz or 40 kHz transducers (1500 W to 3000 W) strip microscopic contaminants from internal cavities and delicate precision surfaces.
  • Deep Vacuum DryingEliminates moisture from blind holes, micro-bores, and complex internal channels by lowering the water boiling point — preventing corrosion and water spots on critical components.
  • Modular Multi-Tank ExpansionStandard configuration with modular options to integrate a 3rd tank (500 L) and 4th tank (500 L) for multi-stage rinse, passivating, or rust-inhibition processes.
  • Optional Rotational Lance SprayingSpecialised internal rotational lances ensure direct 360° spray impact on complex internal part geometries and recessed surfaces for uniform cleaning coverage.
  • Heavy-Duty SS304 ConstructionAll tanks, manifolds, wetted internal components, and cabinet walls fabricated from corrosion-resistant SS304 stainless steel for maximum chemical compatibility and service life.
Get a Quote